Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Center Display of the Peugeot Landtrek?

Model: Peugeot Landtrek MK 1 - Years 2020-2026
Part: Car stereo

To replace the center display of the Peugeot Landtrek, use a prying tool to detach the climate control panel located directly below the center display. Once the panel is detached, disconnect its connectors at the back and remove it completely. Then, unscrew the screws that secure the display from underneath and at the back, disconnecting its connectors as well and removing it entirely. Finally, connect and secure the new replacement parts.

Updated on 24 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Installing the Android Multimedia System on the Peugeot Landtrek
Guide to Installing the Android Multimedia System on the Peugeot Landtrek
Peugeot Landtrek (2020-2026 / MK 1) In today's video, we will go over the main instructions to install a new Android multimedia system on the Peugeot Landtrek. First, get inside the veh…
How to Use the External Cameras on a Peugeot Landtrek
How to Use the External Cameras on a Peugeot Landtrek
Peugeot Landtrek (2020-2026 / MK 1) In this guide, discover how to use the external cameras on a Peugeot Landtrek, assisting the driver during parking maneuvers and while driving. First…
How to Replace the Speakers of the Peugeot Landtrek
Peugeot Landtrek (2020-2026 / MK 1) In this guide, we will provide instructions to remove and replace the speakers of the Peugeot Landtrek. First, open the front door and start removing…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos