Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Internal Fuse Box of the Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Fuse box

In this video tutorial, you will learn how to remove and replace the internal fuse box of the Peugeot 307 by following these simple steps. First, get inside the vehicle and start by removing the lower plastic panel on the driver's side to access the fuse box; then disconnect the electrical connectors of the fuse box, removing it along with the diagnostic socket, as shown in the video. At this point, replace the fuse box with a new one of the correct type; finally, check that all the fuses are in good condition.

Updated on 10 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Diagram and Positioning of the Internal Fuse Box of the Peugeot 307
Diagram and Positioning of the Internal Fuse Box of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In today's tutorial video, find out where to locate the internal fuse box and the diagram for the Peugeot 307, following the instructions below. Firs…
Where to Find the Fuse Boxes on a Peugeot 307?
Where to Find the Fuse Boxes on a Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) Today, in this video tutorial, we will see where to find the fuse boxes (internal and external) on a Peugeot 307. First, open the bonnet and locate t…
Where is the fuse box of the Peugeot 307 located?
Where is the fuse box of the Peugeot 307 located?
Peugeot 307 (2001-2009 / MK 1) To discover where the fuse box of your Peugeot 307 is located, you simply need to follow all the steps described in the following guide dedicated to …

    Frequently Asked Questions

    • 307 2001-2009 - Where is the air conditioning fuse located in the Peugeot 307? Read answer
    • 307 2001-2009 - Where is the f8 fuse located on the Peugeot 307? Read answer

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos