Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Box Diagram and Location for the Peugeot 307

Model: Peugeot 307 MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Fuse box

Video tutorial

This guide shows the diagram and location of the various fuse boxes for the Peugeot 307, following the instructions below. First, get into the vehicle and remove the plastic cover located to the left of the steering wheel, on the driver's side; you will find the internal fuse box just behind it, as illustrated in the video.

The external fuse box is located in the engine compartment, next to the battery; remove the cover to access it. The guide illustrates the fuse diagram, associated with a code and amperage!


Updated on 14 May 2026 by ScegliAuto


Related tutorials

Diagram and Positioning of the Internal Fuse Box of the Peugeot 307
Diagram and Positioning of the Internal Fuse Box of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In today's tutorial video, find out where to locate the internal fuse box and the diagram for the Peugeot 307, following the instructions below. Firs…
What is the fuse diagram of the Peugeot 307?
What is the fuse diagram of the Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) The fuses, as all drivers surely know, are present in any vehicle and obviously also in the Peugeot 307. All of them, including the relays, are colle…
What is the Fuse Diagram and Where is the Fuse Box of a Peugeot 307?
What is the Fuse Diagram and Where is the Fuse Box of a Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) Along with this article, a video is attached, showing the diagram and positioning of all the fuses for our Peugeot 307. Fuses serve to prevent damage…

Other guides you may be interested in

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos