Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Indicator Stalk on Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Steering wheel

Insert a flat screwdriver into the two side holes located behind the steering wheel and wiggle it slightly to release the outer part of the steering wheel, which contains the horn. Disconnect the rear connectors (horn and airbag). Next, unscrew the large central Torx screw and remove the metal ring. Pull the steering wheel and shake it to release it from its housing. Now you can unscrew the two screws underneath that connect the long upper and lower plastics. At this point, disconnect the other connectors and unscrew the screws that secure the round plastic support to which the indicator stalk is attached. Proceed in reverse for reassembly.

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Light and Wiper Switches in a Peugeot 307
How to Replace the Light and Wiper Switches in a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) This guide provides instructions for removing and replacing the light and wiper switches in a Peugeot 307. First, open the bonnet of your car and dis…
How to Replace the Indicator Stalk of the Peugeot 307
How to Replace the Indicator Stalk of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Let's see how to replace the indicator stalk of the Peugeot 307: disconnect the battery, and remove the airbag by inserting a flat screwdriver behind…
How to Replace the Indicator Bulb on a Peugeot 307
How to Replace the Indicator Bulb on a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) In this mini guide, you will discover how to replace the side indicator bulb on your Peugeot 307. First, park the vehicle safely and remember to turn…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos