Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Light and Wiper Switches in a Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009

This guide provides instructions for removing and replacing the light and wiper switches in a Peugeot 307. First, open the bonnet of your car and disconnect the battery; then, get inside the vehicle and remove the airbag and steering wheel by disconnecting the electrical connector and unscrewing the central bolt, as shown in the video. Next, unscrew the switches and the indicator stalk to remove it, disconnecting all the electrical wiring, following the video tutorial until the end!

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where Are the Fuses in the Peugeot 307?
Where Are the Fuses in the Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) The fuses in the Peugeot 307 are divided between two dedicated fuse boxes installed in the vehicle: the first box is located inside the cabin, at the…
Where are the fuses located in the Peugeot 307?
Where are the fuses located in the Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) The fuses in the Peugeot 307 are contained within the designated fuse boxes installed in the vehicle: in this model of car, you can find two boxes fo…
Replacement of the front wipers of the Peugeot 307
Replacement of the front wipers of the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Today's procedure will show us how to disassemble and replace the front windshield wipers of the Peugeot 307, following the instructions below. First…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos