Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the front wipers of the Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Windshield wipers

Today's procedure will show us how to disassemble and replace the front windshield wipers of the Peugeot 307, following the instructions below. First, we open the car's hood and start lifting the windshield wiper arm; then we rotate the windshield wiper blade and release the clip to remove it, as shown in the video. At this point, we replace and install the new windshield wiper, of the correct type and size; we properly secure it to the arm and also replace the other windshield wiper in the same way, and if necessary, also the rear windshield wiper!

Posted on 31 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Where are the Windscreen Wiper Fuses Located in a Peugeot 307?
Where are the Windscreen Wiper Fuses Located in a Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) If the windscreen wipers on your Peugeot 307 suddenly stop working, first check the status of the relevant fuses. As shown in this video, the rear wi…
Where are the fuses located in the Peugeot 307?
Where are the fuses located in the Peugeot 307?
Peugeot 307 (2001-2009 / MK 1) The fuse boxes of the Peugeot 307 are responsible for containing the fuses that regulate the operation of the devices installed inside the vehicle: t…
How to Replace the Light and Wiper Switches in a Peugeot 307
How to Replace the Light and Wiper Switches in a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) This guide provides instructions for removing and replacing the light and wiper switches in a Peugeot 307. First, open the bonnet of your car and dis…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos