Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Peugeot 108

Model: Peugeot 108 MK 1 - Years 2014-2021
Part: Tire pressure warning light

When the low tyre pressure warning light illuminates on your dashboard, first check the actual tyre pressures. If necessary, restore the pressures recommended by the manufacturer. After completing these steps, you will need to reset the warning light that has come on. To do this, sit in the driver's seat and turn on the ignition. Locate the reset button on the left side of the steering column at the bottom of the dashboard. Press and hold it for at least 3 seconds, after which the yellow warning light on the dashboard will turn off.

Updated on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on a Peugeot 108
How to Reset the Tyre Pressure Light on a Peugeot 108
Peugeot 108 (2014-2021 / MK 1) To reset the tyre pressure light on a Peugeot 108, start by turning on the ignition. Notice the yellow light on the dashboard indicating that you nee…
How to Reset the Tyre Pressure Warning Light on the Peugeot 108?
How to Reset the Tyre Pressure Warning Light on the Peugeot 108?
Peugeot 108 (2014-2021 / MK 1) To reset the tyre pressure warning light on the Peugeot 108, open the glove compartment located on the passenger side. Once opened, locate the button…
How to reset the tyre pressure warning light on the Peugeot 108?
How to reset the tyre pressure warning light on the Peugeot 108?
Peugeot 108 (2014-2021 / MK 1) To reset the tyre pressure warning light on the Peugeot 108, first inflate all the tyres to the recommended pressure value: this value is indicated o…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos