Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Peugeot 307?

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Timing belt

To replace the timing belt on the Peugeot 307, lift the car to loosen the bolts securing the front right wheel. Remove the wheel along with the corresponding inner wheel arch cover. This will allow you to locate the crankshaft pulley and the tensioner roller. The tensioner roller must be completely removed, and the belt can now be slid off the crankshaft pulley. After it has been removed from the camshaft pulleys, you can fit the new belt, refitting all previously removed components.

Updated on 27 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to replace the timing belt on the Peugeot 307 1.6 HDI
How to replace the timing belt on the Peugeot 307 1.6 HDI
Peugeot 307 (2001-2009 / MK 1) Below are the instructions for removing and replacing the timing belt on the Peugeot 307 1.6 HDI. First, open the bonnet of the vehicle and begin by …
How to Replace the Timing Belt on a Peugeot 307 2.0 HDi
How to Replace the Timing Belt on a Peugeot 307 2.0 HDi
Peugeot 307 (2001-2009 / MK 1) Below we will discover how to disassemble and replace the timing belt on a Peugeot 307 2.0 HDi. First, lift the vehicle and start by removing the fro…
Timing Belt Replacement Intervals for the Peugeot 307
Timing Belt Replacement Intervals for the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) The timing belt is a toothed belt that transmits the movement from the crankshaft to the camshaft, which regulates the movement of the pistons and va…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos