Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 307
    4. : How to replace the timing belt of the Peugeot 307 1.6 HDI

Peugeot 307 - Video tutorial

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Timing belt
Operation: How to replace the timing belt of the Peugeot 307 1.6 HDI

Below we will see the instructions that will allow us to disassemble and replace the timing belt of the Peugeot 307 1.6 HDI. First of all, we open the hood of the car and start by removing the brake fluid reservoir; then we lift the car and remove the front right wheel, removing the wheel arch and disconnecting the alternator belt, as shown in the video. At this point, we remove the timing belt cover to access the belt, taking the necessary references for replacement; we then install the new original timing belt!


Posted on 13 April 2024 by ScegliAuto

    Frequently Asked Questions

    • 307 2001-2009 - How many km do you have to change the timing belt of the Peugeot 307 hdi? Read Answer
    • 307 2001-2009 - After how many years should the Peugeot 307 timing belt be replaced? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos