Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Bonnet on a Peugeot 207?

Model: Peugeot 207 MK 1 - Years 2006-2015
Part: Body

In this tutorial, you will see how to open the bonnet on a Peugeot 207, a very simple operation that follows the typical procedure for most vehicles. First, unlock the latches using the remote control button, then open the driver's door, locate the lever on the lower left side of the cabin, and pull it. Next, move to the front of the vehicle, pull the second lever located to the right of the logo, and lift the bonnet. To close it, simply let it drop gently.

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the diesel filter of the Peugeot 207?
How do you replace the diesel filter of the Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) In order to replace the fuel filter of the Peugeot 207, you need to open the hood so that you can access the components located inside the engine com…
How to Open the Bonnet on a Peugeot 207
How to Open the Bonnet on a Peugeot 207
Peugeot 207 (2006-2015 / MK 1) .. Learn how to open the bonnet on a Peugeot 207. Enter the vehicle: pull the lever located at the bottom left.. …
How do you replace the battery of the Peugeot 207?
How do you replace the battery of the Peugeot 207?
Peugeot 207 (2006-2015 / MK 1) In order to replace the battery of the Peugeot 207, you need to open the hood so that you can access the components in the engine compartment: here y…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos