Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 307
    4. : Replacement of the Peugeot 307 Battery

Peugeot 307 - Video tutorial

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Battery
Operation: Replacement of the Peugeot 307 Battery

In this video we see how to proceed to change the battery of the Peugeot 307 that has run out. We open the hood, we will find the battery on the driver's side, we remove the air intake box, we release the positive terminal clamp and remove it, we remove the plastic cover, we release the negative terminal clamp and remove it. We remove the peripheral battery protection, with a socket wrench with extension we unscrew the fixing bracket at the base and remove the old battery. We scrape the inside of the terminals with sandpaper, spread a layer of copper grease on the terminals of the new battery and place it in its housing, lock it with the bracket, put back the protection, attach the negative terminal, put back the cover and the negative terminal, conclude by putting back the air intake box.


Posted on 5 May 2024 by ScegliAuto

    Frequently Asked Questions

    • 307 2001-2009 - Why does the Peugeot 307 not start after replacing the battery? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos