Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Door Panel on the Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Door trim panel

After opening the door, unscrew the screw located in the small storage compartment in the middle of the armrest. Next, unscrew the remaining screws indicated in the video. Using a plastic lever, remove the triangular panel near the wing mirror and the chrome trim of the handle. Also, lift the window switch panel to disconnect the connector at the back. Now, using the plastic lever, start from one corner to lift the panel from the door, releasing all the clips that still hold it in place. Pull it towards you and disconnect the last cables at the back.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Peugeot 307 (2001-2009 / MK 1) Following these brief instructions, we will see how to disassemble the front door panel of the Peugeot 307. First, we open the front door and start u…
Peugeot 307 (2001-2009 / MK 1) Before you start, open the door of your Peugeot 307. Begin by prying off and removing the door panel inserts using a thin but sturdy tool. Next, remo…
Peugeot 307 (2001-2009 / MK 1) To remove the door panel on a Peugeot 307, loosen the screws that secure it to the corresponding door: first, unscrew the one next to the window swit…

Other guides you may be interested in

How to Open the Fuel Filler Flap on a Hyundai i20?

In this tutorial, you will see how to open the fuel filler flap on a Hyundai i20, a very simple operation similar to that of many vehicles. First, go inside the cabin; it is not necessary to insert the key or unlock all the locks, then locate and operate the lever situated in the lower left area of the cabin, right next to the driver's seat. Once done, exit the vehicle, fully open the flap, and unscrew the fuel cap. To close the flap, simply press it gently until you hear a click.

Watch the video!


by ScegliAuto

More videos