Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Extract the Spare Wheel from a Peugeot 307

Model: Peugeot 307 MK 1 - Years 2001-2009
Part: Wheel

What may seem like a simple operation can sometimes be significantly more difficult if you are not familiar with your vehicle. By removing the side panel in the boot, you can use the appropriate tool to unscrew the bolt that will allow you to lower the wheel. This bolt is located under the round cover at the base of the boot. To fully retrieve your spare wheel, you will need to open the compartment inside and remove the hook that was holding it in place, and you're done!

Updated on 26 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Spare Wheel from the Peugeot 307 SW
How to Remove the Spare Wheel from the Peugeot 307 SW
Peugeot 307 (2001-2009 / MK 1) In today's tutorial video, discover how to extract the spare wheel from its compartment in the Peugeot 307 SW. First, open the boot's rear hatch and …
How to Remove and Replace the Wheel with the Spare on the Peugeot 307
How to Remove and Replace the Wheel with the Spare on the Peugeot 307
Peugeot 307 (2001-2009 / MK 1) Below are the main steps to remove and replace the wheel with the spare on the Peugeot 307. First, loosen the wheel bolts using the appropriate wrenc…
How to Remove the Spare Wheel from a Peugeot 307
How to Remove the Spare Wheel from a Peugeot 307
Peugeot 307 (2001-2009 / MK 1) The idea of positioning the spare wheel underneath the vehicle floor, rather than under the boot floor, allows you not to have to completely empty th…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos