Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Mp3
Part:

Today, we will describe how to remove the passenger backrest on a Piaggio MP3 vehicle. To perform this operation, you will need a 5mm star screwdriver and a flathead screwdriver. Open the storage compartment and using the flathead screwdriver, remove the internal light cover. Remove all the screw covers and using the star screwdriver, unscrew them one by one. After removing the screws, close the storage compartment and pull out the backrest. If you have finished the work, reinstalling the backrest requires the reverse procedure; simply position the backrest in its place and screw in the screws.

Posted on 5 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Piaggio MP3
How to Reset the "Service" Light on a Piaggio MP3
Mp3 Before you begin, sit on the seat of your Piaggio MP3. Start by pressing and holding the right button located at the bottom of the instrument panel. …
How to Remove the Seat of the Piaggio MP3
How to Remove the Seat of the Piaggio MP3
Mp3 In this brief and simple guide, discover how to remove and replace the driver and passenger seats of the Piaggio MP3 scooter by following the instruc…
How to Reset the Belt Light on a 2012 Piaggio MP3
How to Reset the Belt Light on a 2012 Piaggio MP3
Mp3 If you notice the belt light stays on when starting your Piaggio MP3, despite having performed the necessary maintenance, you will need to proceed wi…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos