Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To remove the glove compartment on the Vespa 125 (also 150 and 200), you need to unscrew four 8 mm screws located inside the drawer itself. This is not a very easy job, as the space to work within the glove compartment is quite limited. Once the four screws are removed, the drawer comes out easily. Just be careful of the cables running above, which supply power to the side indicators; these must be disconnected from their terminals to allow the wire to exit and remove the drawer smoothly. Otherwise, the job presents no further difficulties.

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install the Battery on a Vespa 125 Without the Glove Compartment
How to Install the Battery on a Vespa 125 Without the Glove Compartment
Vespa 125 Lx To install the 12V battery on a Vespa 125 without the glove compartment, the battery must be fitted in the space under the seat on a bracket, connect…
How to Remove the Front Wheel of a Vespa LX 125
How to Remove the Front Wheel of a Vespa LX 125
Vespa 125 Lx To correctly remove the front wheel of your Vespa LX 125, follow these few simple steps outlined in this guide. Before starting, ensure you have a ba…
Replacing the Battery on a Piaggio Vespa
Replacing the Battery on a Piaggio Vespa
Vespa 125 Lx Replacing the battery on a Vespa is quite simple. To do this, lift the seat using the ignition key and access the compartment underneath. The battery…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos