Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Windscreen of the Piaggio MP3

Model: Piaggio Mp3
Part: Windshield

Video tutorial

In this brief and simple guide, see the steps to remove and replace the front windscreen of the Piaggio MP3 scooter, following the instructions below. First, move to the front of your scooter and start by removing the central logo, prying at the sides with something thin; then unscrew the screw found underneath using a cross-head screwdriver, as shown in the video.

At this point, you can remove the windscreen, replacing it with the new one (of the correct type); all that’s left is to secure it properly and reassemble everything!


Updated on 10 June 2026 by ScegliAuto


Related tutorials

How to Replace the Windscreen on a Piaggio MP3
How to Replace the Windscreen on a Piaggio MP3
Mp3 To replace the windscreen on a Piaggio MP3, unscrew the screws that secure the two supports at the front centre of the windscreen to remove them. Nex…
How to disassemble the rear fairings on the Piaggio MP3 scooter?
How to disassemble the rear fairings on the Piaggio MP3 scooter?
Mp3 In this tutorial we can see how to remove the rear fairings on the Piaggio MP3 scooter, an extremely simple and fast operation. First of all, go to t…
How to Replace the Headlight Bulb on a Piaggio MP3
How to Replace the Headlight Bulb on a Piaggio MP3
Mp3 To replace the headlight bulb on the Piaggio MP3, loosen the screws securing the windscreen and the fairing directly above the headlight. Once these …

How to Change the Engine Oil on the BMW K1600?

To carry out the engine oil change on the BMW K1600, you need to loosen the drain plug of the oil sump, which is located at the central bottom of the vehicle: once this plug has been unscrewed, you can collect all the used oil in a suitably positioned container. At this point, you can remove the oil filter from its housing on the right side of the bike; after removal, you can top up through the breather located on the right side of the bike. Once topping up is complete, ensure everything is functioning correctly.

Watch the video!


by ScegliAuto

More videos