Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Temperature Unit on the Piaggio MP3

Model: Piaggio Mp3
Part: Instrument cluster

Video tutorial

If you want to manually change the external temperature unit displayed on the central dashboard of your Piaggio MP3, carefully read the following instructions and put them into practice. First, place the scooter on its stand, locate the "Mode" button situated at the bottom of the right knob, and hold it down.

At the same time, insert the key and turn on the dashboard. Now select your preferred unit of measurement using the button located to the left of the rev counter.

Finally, turn off the dashboard and the procedure is complete.


Updated on 9 July 2026 by ScegliAuto


Related tutorials

How to Set the Time on the Piaggio MP3
How to Set the Time on the Piaggio MP3
Mp3 If you have just replaced the battery on your Piaggio MP3 and need to reset the correct time, follow the instructions below. First, insert the key an…
How to Set the Time on a Piaggio MP3
How to Set the Time on a Piaggio MP3
Mp3 In this guide for all Piaggio MP3 owners, we will discover step by step how to manually set the time displayed on the central dashboard. First, turn …
How to Reset the "Service" Light on a Piaggio MP3
How to Reset the "Service" Light on a Piaggio MP3
Mp3 Before you begin, sit on the seat of your Piaggio MP3. Start by pressing and holding the right button located at the bottom of the instrument panel. …

How to Dismantle the Centre Fairing of the Piaggio MP3

Below are the instructions to dismantle and replace the centre fairing of the Piaggio MP3 500 and 250 scooter. First, place the scooter on its stand and start by removing the small side plastic cover, unscrewing the fixing screws located underneath. Then, remove the fuel cap and disconnect the centre fairing by unplugging the electrical connector found underneath, as shown in the video. At this point, replace and install the new fairing, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos