Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Renault
  4. :
  5. Kangoo
  6. : Brake system

Renault Kangoo - Brake system

Brake System Renault Kangoo (1997-2008 / mk 1, k c, k w)

Renault Kangoo (1997-2008 / MK 1, KC, KW)
How to Repair the Brake Light Switch on the Renault Kangoo 1

The repair illustrated in this video is temporary, to be done in an emergency (for example, while travelling): the advice is to buy a new one (the cost is not …Read all…
Posted on 25 September 2026 by ScegliAuto

Cigarette lighter (3) Airbag (11) Alternator (2) Speaker (2) Shocks (3) Air conditioning (1) Car stereo (11) Anti-roll bar (2) Battery (3) Transmission (3) Spark plugs (4) Glow plugs (1) Body (1) Key (8) Timing belt (4) Air conditioner (2) A/C controls (1) Onboard computer (4) Checks and maintenance (26) Dashboard (5) Headlight (7) Tail light (9) Fog lights (4) Air filter (16) Cabin air filter (22) Fuel filter (1) Diesel fuel filter (6) Oil filter (9) Light bulb (2) Headlight bulb (9) Tail light bulb (5) Instrument panel light (1) License plate light (1) (4) Handle (4) Power window motor (1) Starter motor (7) Engine oil (6) Clock (34) Door trim panel (10) Windshield (1) Front bumper (4) Rear bumper (3) Brake pads (5) Hydraulic pistons (1) Shift knob (7) Pump (1) Fuel pump (7) Car door (4) Instrument cluster (3) Radiator (1) Heater core (3) Wheel (4) Fuse box (56) Seat (6) Door lock (2) Brake system (1) Side mirror (7) Rearview mirror (1) AdBlue warning light (1) Warning light – error code (24) (10) Tire pressure warning light (4) Service warning light (99) Windshield wipers (2) Center console tunnel (1) EGR valve (1) Blower motor (12) Steering wheel (5)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos