Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Dipped Beam Bulb of the Renault Clio 5

Model: Renault Clio Clio V, Clio 5 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Headlight bulb

See other generations:
Video tutorial

If the dipped beam headlamp bulb of the Renault Clio burns out, replace it as soon as possible for your safety. To do this, open the engine bay bonnet, stand in front of the headlamp housing the blown bulb, and locate the bulb connector on the side facing the engine; disconnect it, remove the rubber cover, and take that off as well.

Release the two metal clips that hold the bulb in place and remove it. Insert the new H4 bulb, taking care not to touch the glass bulb, refit the clips, reposition the rubber cover, and reconnect the connector.


Updated on 23 October 2026 by ScegliAuto


Related tutorials

Replacing Dipped Beam Bulb on Renault Clio 3
Replacing Dipped Beam Bulb on Renault Clio 3
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Working with the engine off and the handbrake engaged, open the bonnet and insert the support rod. At this point, you can simply remove the round rea…
Replacing the Dipped Beam on Renault Clio 2
Replacing the Dipped Beam on Renault Clio 2
Renault Clio (1998-2005 / MK 2, Clio 2) In our other tutorials, we show you how to replace the bulbs on Renault Clio 3 and 4; here, we demonstrate on a Renault Clio 2. Working with the engi…
How to Replace the Dipped Beam Bulbs in a Renault Clio?
How to Replace the Dipped Beam Bulbs in a Renault Clio?
Renault Clio (1998-2005 / MK 2, Clio 2) In this tutorial, you will see how to replace the dipped beam bulbs in a Renault Clio 2, a very simple and quick operation. Before proceeding, ensure…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos