Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the door panel of the Renault Clio 2

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Door trim panel

The removal of the door panel of the Renault Clio model 2 is a simple and quick operation to be carried out independently. We start the removal of the front right door panel by unscrewing the screws behind the opening handle and removing it. We continue by removing the lower part of the panel so that we can unscrew the speaker screws. We finish by unscrewing the bottom and side screws and then removing the panel completely. Now it will be possible to carry out replacement work on the speaker, the lock, and so on. The assembly of the panel follows the reverse procedure.

Posted on 24 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How to remove the door panel of a Renault Clio
How to remove the door panel of a Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Today we will list the steps to follow to remove the door panel of a Renault Clio mk4 model vehicle. To perform this operation we must: - open the do…
Guide to Removing the Door Panel of the Renault Clio
Guide to Removing the Door Panel of the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) This guide shows you how to remove and replace the front door panel of the Renault Clio. First, open the front or rear door and start removing the pl…
How to Remove and Refit the Door Panel on a Renault Clio 4
How to Remove and Refit the Door Panel on a Renault Clio 4
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this video tutorial, we will see how to remove and then refit the door panel on a Renault Clio 4 by following some simple steps that will allow yo…

Other guides you may be interested in

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos