Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Refit the Door Panel on a Renault Clio 4

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Door trim panel

See other generations:
Video tutorial

In this video tutorial, we will see how to remove and then refit the door panel on a Renault Clio 4 by following some simple steps that will allow you to work independently. To remove the panel, first, you need to remove the securing screws (highlighted in red in the video); then, using a small flathead screwdriver, remove the caps covering the screws; next, unscrew the securing screws; once the screws are removed, pull the panel perpendicularly to the door and disconnect the cables from the door.

To refit the panel, proceed in reverse order.


Updated on 10 July 2026 by ScegliAuto


Related tutorials

How to Replace the Door Lock on a Renault Clio?
How to Replace the Door Lock on a Renault Clio?
Renault Clio (1998-2005 / MK 2, Clio 2) To replace the door lock on a Renault Clio, loosen the screws securing the corresponding internal protection panel: these are located at the central …
How to Remove the Door Lock Actuator from a Renault Clio
How to Remove the Door Lock Actuator from a Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) This guide shows how to remove and replace the door lock actuator of the front door on a Renault Clio, following the instructions below. First, open …
Removing the Front Door Panel of the Renault Clio
Removing the Front Door Panel of the Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) This guide provides information on how to remove the front door panel of the Renault Clio in simple steps. First, open the front door of the vehicle …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos