Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Door Lock on a Renault Clio?

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Door lock

To replace the door lock on a Renault Clio, loosen the screws securing the corresponding internal protection panel: these are located at the central lower part of the panel. Once loosened, along with those positioned beneath the speaker housing, you can completely detach the door panel. This will allow you to access the lock from the inside, which must be freed from its securing screws and disconnected from the relevant cables; you can then insert the new replacement part and refit the door panel.

Updated on 12 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Lock Actuator from a Renault Clio
How to Remove the Door Lock Actuator from a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) This guide shows how to remove and replace the door lock actuator of the front door on a Renault Clio, following the instructions below. First, open …
Replacing the Door Lock Cylinder of the Renault Clio
Replacing the Door Lock Cylinder of the Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Today, in this video tutorial, see how to remove and replace the door lock cylinder of the front door of the Renault Clio. First, open the front door…
How to Replace the Driver's Door on a Renault Clio?
How to Replace the Driver's Door on a Renault Clio?
Renault Clio (1998-2005 / Clio 2, MK 2) In this tutorial, you will learn how to replace the driver's door on a Renault Clio. This is a straightforward task but requires good manual skills. …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos