Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the front door panel of the Renault Clio

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Door trim panel

The information provided in this guide will show us how to disassemble the front door panel of the Renault Clio, in simple steps. First, we open the front door of the car and start disassembling and removing the window switch panel, leveraging on the sides and disconnecting the electrical connector found underneath; then we unscrew the fixing screws of the panel and then lever on the sides of it, in order to detach and remove it, as shown in the video. At this point, it will be possible to access the internal components of the door, finally reassembling the inner panel!

Posted on 9 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Guide to Removing the Door Panel of the Renault Clio
Guide to Removing the Door Panel of the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) This guide shows you how to remove and replace the front door panel of the Renault Clio. First, open the front or rear door and start removing the pl…
How to Remove the Window Switch Button from the Front Door of a Renault Clio
How to Remove the Window Switch Button from the Front Door of a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Before you can start, open the front door of your Renault Clio. Begin by unscrewing and removing the Torx screw that secures the window switch with i…
Removing the Door Panel of a Renault Clio
Removing the Door Panel of a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) In today's tutorial, you will learn how to remove the internal door panel of a Renault Clio. First, open the front door and start by removing all the…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos