Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Door Panel of the Renault Clio

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Door trim panel

See other generations:
Video tutorial

This guide shows you how to remove and replace the front door panel of the Renault Clio. First, open the front or rear door and start removing the plastic caps on the door panel by unscrewing the fixing screws underneath. Then, lever off the side of the panel, disconnecting the electric connector for the window switch and the handle cable, as shown in the video.

At this point, replace the door panel if necessary, applying the reverse procedure!


Updated on 8 August 2026 by ScegliAuto


Related tutorials

How to Remove the Door Lock from a Renault Clio
How to Remove the Door Lock from a Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) How to remove the door lock (driver's side) from a Renault Clio? This video explains how to proceed. Before starting the disassembly work, disconnect…
How to Replace the Window Switch on a Renault Clio
How to Replace the Window Switch on a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) Let's see how to replace the window switch on the Clio. Before starting disassembly, disconnect the terminals of the battery located in the front eng…
Replacing the Lock/Central Locking on the Renault Clio II
Replacing the Lock/Central Locking on the Renault Clio II
Renault Clio (1998-2005 / MK 2, Clio 2) Today, discover the main steps to dismantle and replace the lock or central locking of the doors on the Renault Clio second series. First, open the f…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos