Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Lock/Central Locking on the Renault Clio II

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Door lock

Today, discover the main steps to dismantle and replace the lock or central locking of the doors on the Renault Clio second series. First, open the front door and start by removing the door panel by unscrewing the screws found under the plastic caps; also remove the window winder handle and unscrew all the side screws of the lock using a Torx screwdriver. Once the panel is removed, disconnect and remove the entire lock module, as shown in the video; then replace it with the new one!

Updated on 30 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Open a Stuck Boot Lid on a Renault Clio
How to Open a Stuck Boot Lid on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) This guide shows the emergency steps to open the stuck rear boot lid of a Renault Clio in case of a lock failure. First, open the rear doors and star…
How to Open the Bonnet of the Renault Clio Mk3
How to Open the Bonnet of the Renault Clio Mk3
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) This guide shows how to open the bonnet of the Renault Clio Mk3. The procedure is very simple and easy to execute. The first step is to pull the rele…
How to open the trunk of the Renault Clio 4
How to open the trunk of the Renault Clio 4
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Today we will explain how to open the trunk of a Renault Clio model mk4 from the inside in case the lock is broken or stuck. To perform this operatio…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos