Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the door panel of a Renault Clio

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Door trim panel

Today we will list the steps to follow to remove the door panel of a Renault Clio mk4 model vehicle. To perform this operation we must: - open the door in question; - remove the screw covers, using a flat head screwdriver; - unscrew the central screw; - unscrew the screw behind the opening handle; - insert plastic levers into the panel to remove it; - remove the panel; - disconnect the power window switch connector; Once these steps have been completed, we can proceed to disassemble the lock or speaker.

Posted on 12 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Refit the Door Panel on a Renault Clio 4
How to Remove and Refit the Door Panel on a Renault Clio 4
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this video tutorial, we will see how to remove and then refit the door panel on a Renault Clio 4 by following some simple steps that will allow yo…
Guide to Removing the Door Panel of the Renault Clio
Guide to Removing the Door Panel of the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) This guide shows you how to remove and replace the front door panel of the Renault Clio. First, open the front or rear door and start removing the pl…
Disassembly of the front door panel of the Renault Clio
Disassembly of the front door panel of the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) The information provided in this guide will show us how to disassemble the front door panel of the Renault Clio, in simple steps. First, we open the …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos