Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the door panel of the Renault Clio

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Door trim panel

To replace the passenger side door panel of the Renault Clio, we start by removing the plastic behind the right side mirror, remove the cap covering the screw behind the interior door handle and unscrew the screw; now unscrew the two screws under the door panel, unhook the plastic of the door handle starting from the bottom and then disconnect the electric window connector; finally unscrew the side screw of the panel. Now we can remove the panel using appropriate pliers to unhook the panel from the fittings; unhook the door handle cord and the speaker. To reassemble the new door panel, we can follow the reverse procedure compared to disassembly.

Posted on 21 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Guide to Removing the Door Panel of the Renault Clio
Guide to Removing the Door Panel of the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) This guide shows you how to remove and replace the front door panel of the Renault Clio. First, open the front or rear door and start removing the pl…
How to Remove the Door Lock Actuator from a Renault Clio
How to Remove the Door Lock Actuator from a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) This guide shows how to remove and replace the door lock actuator of the front door on a Renault Clio, following the instructions below. First, open …
How to Remove and Refit the Door Panel on a Renault Clio 4
How to Remove and Refit the Door Panel on a Renault Clio 4
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this video tutorial, we will see how to remove and then refit the door panel on a Renault Clio 4 by following some simple steps that will allow yo…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos