Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear bench of the Renault Clio

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Rear bench seat

See other generations:
Video tutorial

These short and simple steps will show us how to disassemble and remove the rear seat of the Renault Clio. First, we open the rear doors of the car and start pulling the rear seat upwards with force, until it comes off completely; if we also want to remove the backrests, we just need to unscrew all the fixing screws we find on the base, as shown in the video.

At this point, we carry out the repair or cleaning of the rear seats, reassembling the backrests first and then the rear seat, following the video tutorial until the end!


Posted on 30 August 2025 by ScegliAuto


Related tutorials

Guide to disassembling the rear seats of the Renault Clio
Guide to disassembling the rear seats of the Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) In this guide, we will see the main instructions that will allow us to disassemble and remove the rear seats of the Renault Clio, in simple steps. Fi…
How to Remove the Rear Light of the Renault Clio 3
How to Remove the Rear Light of the Renault Clio 3
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Removing the rear light from your Renault Clio Mk3 is very simple. Follow these few easy steps to complete the operation. First, park your Renault Cl…
Replacing the Rear Seatbelt Anchorages on a Renault Clio
Replacing the Rear Seatbelt Anchorages on a Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) Today, we will see the instructions that will allow you to remove and replace the rear seatbelt anchorages on a Renault Clio. First, open the rear do…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos