Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear headlight of the Renault Clio 3

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Tail light

Disassembling the rear light of your Renault Clio Mk3 is very simple and to complete the operation you just need to follow a few simple steps. Let's find out what they are. First of all, park your Renault Clio safely, then make sure to turn it off completely and go outside. Next, lift the rear hood and with the help of a Phillips screwdriver, unscrew all the various screws holding the light in place. Once you have done this, gently pull the light towards you and disconnect the electrical cable located at the back to complete the procedure.

Posted on 26 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Remove Rear Stop Light on Clio
Remove Rear Stop Light on Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Do you want to remove the rear light of the Renault Clio? Here’s how to do it from inside the rear of the car. Open and lift the boot, then locate th…
How to Remove the Rear Light of a Renault Clio 4
How to Remove the Rear Light of a Renault Clio 4
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) To remove the rear light of a Renault Clio 4, follow these simple steps to avoid damaging your car. First, lift the bonnet; this will allow you to ac…
How to Remove the Rear Light of the Renault Clio?
How to Remove the Rear Light of the Renault Clio?
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Removing the rear light of the third series Renault Clio is very simple; let's see how to proceed in this tutorial. For this operation, you will only…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos