Do it yourself
Frequently asked questions about cars and motorcycles

How do you reset the Service light on the Renault Clio 2?

Model: Renault Clio MK 2, Clio 2 - Years 1998-2005
Part: Service warning light

On the instrument panel of the Renault Clio 2, you can completely make the Service light disappear by turning on the instrument panel and turning the key inside the ignition switch: once the panel is turned on, you can hold down the button located on its right side. You must keep it pressed until all the lights on the panel are lit up; after the lights go off, you will notice that the Service light has been reset. You can verify that the reset has been done correctly by restarting the panel.

Posted on 3 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2012-2019 / MK 4, Clio 4, Clio IV) The use of the car also means having to provide, following the maintenance schedule of the parent company, maintenance such as engine oil change, eng…
Renault Clio (2012-2019 / MK 4, Clio 4, Clio IV) Before we can begin, we will have to sit in the driver's seat of our Renault Clio. Let's start by activating the instrumentation of our Renault Clio.…
Renault Clio (2019-2026 / Clio 5, Clio V) Here is a method explained verbally and also shown in a video, with which you can reset the service light completely independently. Assuming that all…

    Frequently Asked Questions

    • Clio 1998-2005 - What does the service light on the Renault Clio 2 indicate? Read answer
    • Clio 1998-2005 - What does the Renault Clio 2 service light indicate? Read answer

How to Replace a Damaged Wheel on a Nissan Qashqai

Learn how to replace a damaged wheel on a Nissan Qashqai: open the boot and take the wheel removal kit which includes: jack, jack lever, screwdriver, wheel nut key (if present), telescopic wrench, spare wheel. Position the jack under the jacking point of the vehicle (under the stiffest part of the chassis), lift the car slightly and loosen the wheel nuts. Raise the car with the jack lever and unscrew the nuts, then remove the damaged wheel. Fit the spare wheel onto the hub with the respective nuts and lower the car to the ground. Always remember to store the removal kit back in the boot.

Watch the video!


by ScegliAuto

More videos