Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the pollen filter on a Renault Arkana

Model: Renault Arkana MK 1 - Years 2019-2026
Part: Cabin air filter

In this video, we can see how to change the pollen filter of a Renault Arkana. In this vehicle, the pollen filter is located in the passenger compartment because it is a right-hand drive vehicle. On the side that is in contact with the center tunnel, we remove the footwell panel, and at the bottom, we find a plastic cover: let's open it carefully - it is made of rather fragile materials - and behind it, we will find our filter. We extract it, then with a vacuum cleaner, we remove the dust and debris inside the compartment itself. We place the new and clean filter in its position, being careful about the installation direction (the arrows must always point downwards), then we close the cover and put the plastic panel back in place. Done!

Posted on 21 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service and tire pressure on the Renault Arkana.
How to reset the service and tire pressure on the Renault Arkana.
Renault Arkana (2019-2026 / MK 1) In the Renault Arkana, to reset the maintenance warning after an oil change, park the Renault Arkana and turn on the instrument panel without startin…
How to replace the cabin air filter of the Renault Arkana
How to replace the cabin air filter of the Renault Arkana
Renault Arkana (2019-2026 / MK 1) Today we will explain how to replace the cabin air filter on the Renault Arkana. To perform this operation independently, we need to get on board the…
Where are the engine fuses of the Renault Arkana located?
Where are the engine fuses of the Renault Arkana located?
Renault Arkana (2019-2026 / MK 1) If you are looking for the fuse box of the engine of your Renault Arkana (year 2022), just read the following guide carefully and follow all the step…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos