Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Repair of Window Regulator Motor

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Power window motor

The first operation to perform is the removal of the door panel. Remove the grip cover of the internal handle, under which there are screws to unscrew; extract the glove compartment present on the panel by levering along the edge and pulling it upwards. At this point, unclip the top part of the panel and complete its removal. Once you have accessed the motor, unscrew the screws securing the control module located on the side, disconnect the connector that will need to be connected to the new module via an adapter connector; finally, connect the two wires coming from the module to the contacts of the motor.

Updated on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Window Regulator Motor and Mechanism on a Renault Clio
Replacing the Window Regulator Motor and Mechanism on a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) In this guide, you will see the instructions that will allow you to remove and replace the motor and window regulator mechanism on a Renault Clio. Fi…
Replacing the Window Regulator Motor on a Renault Clio
Replacing the Window Regulator Motor on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this guide, we will cover the main instructions to dismantle and replace the window regulator motor on a Renault Clio. First, open the front door …
How to Remove the Window Regulator Motor from a Renault Clio
How to Remove the Window Regulator Motor from a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) How to remove the window regulator motor from a Renault Clio? Do not worry, follow these steps. Before starting the disassembly, disconnect the batte…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos