Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Interior fan repair Renault Clio 2

Model: Renault Clio MK 2, Clio 2 - Years 1998-2005
Part: Blower motor

When the air speed control switch fails, it usually does not mean that the switch itself is the part to be replaced, but rather the thermal fuse (or resistor) under the hood. So open the hood and put on the special support rod, then remove the gasket and the small plastic bulkhead on your left (facing the passenger compartment) and near the windscreen. VoilÃ! You are already in front of the resistance thermometer. Unscrew the small 6 mm nut and remove it freeing it from the plastic joint. Replace it with the new thermal fuse and reassemble everything.

Posted on 15 December 2020 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio 3 interior fan repair and disassembly
Renault Clio 3 interior fan repair and disassembly
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Let's see in this video how to repair the passenger compartment fan of a Renault Clio third series. First of all, let's first disconnect the two batt…
Replacement of the Cabin Fan in the Renault Clio
Replacement of the Cabin Fan in the Renault Clio
Renault Clio (1990-1998 / MK 1, Clio 1) In this brief guide, we will go through the steps on how to remove and replace the cabin fan in the Renault Clio. First, open the car's bonnet and st…
How to disassemble the cabin fan of the Renault Clio
How to disassemble the cabin fan of the Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Below we will see the instructions on how to disassemble and replace the cabin fan of the Renault Clio. First, open the front passenger door and star…

How to Replace the Grille on BMW 3 Series

In this video, learn how to replace the grille located on the front bumper of a BMW 3 Series. Prepare to remove the plastic grille frame on both sides of the bumper using a plastic trim tool. Pry between the frame and the bumper until the clips on the inside release (remove the screws from the top of the bumper for better access). Once the clips are released, remove the grille from the bumper and install a new one. Reinstall the grille into the car's bumper by pressing it until it locks in place. Check the proper installation of the parts.

Watch the video!


by ScegliAuto

More videos