Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery on Renault Clio 2

Model: Renault Clio MK 2, Clio 2 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Battery

See other generations:
Video tutorial

Lift the bonnet and insert the support rod. As you can now see, the battery is located on your right. Using a 13 mm spanner, unscrew and then disconnect the negative terminal (always disconnect the negative terminal first).

After that, unscrew and disconnect the positive terminal with the same spanner. Using a long socket spanner, also 13 mm, unscrew the bolt securing the battery to the car. Remove the battery from its location by pulling on the designated handle.

Insert the new battery and proceed in reverse for reassembly: secure it with the 13 mm bolt, connect the terminals, and you're done.


Updated on 8 April 2026 by ScegliAuto


Related tutorials

How to Replace the Key Battery of a Renault Clio
How to Replace the Key Battery of a Renault Clio
Renault Clio (1998-2005 / MK 2, Clio 2) Start by prising open the rear side of the key fob for your Renault Clio. Next, using a flathead screwdriver, lever out and remove the key battery. T…
How to Replace the Key Battery on a Renault Clio
How to Replace the Key Battery on a Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Before you can start replacing the key battery on your Renault Clio, you will need a small flathead screwdriver. Begin by prying off and removing the…
How to Replace the Remote Battery in a Renault Clio 5
How to Replace the Remote Battery in a Renault Clio 5
Renault Clio (2019-2026 / Clio V, Clio 5) Next, discover how to correctly and quickly replace the button battery located inside the remote of your new Renault Clio fifth series (2019-2022). F…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos