Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Headlamp Bulb on Renault Megane

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Tail light bulb

Open the boot and observe the area behind the affected headlamp. You will notice a cover that can be easily removed by hand. Once done, you will have access to the two screws that secure the rear light from behind: unscrew them. Now move to the outside of the light and unscrew the T20 Torx screw shown in the video, which secures the plastic next to the light. At this point, you can remove the light (disconnecting the connector), open the housing where the bulbs are fixed, and replace any burnt-out bulb. Proceed in reverse for reassembly. Good luck!

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Use the Manual Key in the Renault Megane?
How to Use the Manual Key in the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) In the Renault Megane, it can happen that the remote battery is flat, making it seemingly impossible to unlock the lock. In this tutorial, you will s…
How to Change the Rear Headlamp Bulb on Megane
How to Change the Rear Headlamp Bulb on Megane
Renault Megane (2002-2010 / Megane 2) Replace the damaged bulbs inside the rear headlamp of a Megane. Open the boot and remove the side trim panel. Locate the plastic components of the bu…
Replacing the Front Headlight Bulb on a Renault Megane 4
Replacing the Front Headlight Bulb on a Renault Megane 4
Renault Megane (2015-2023 / Megane 4, Megane IV) In this tutorial, you will learn how to remove the front headlight bulb on a Renault Megane fourth series. The video demonstrates replacing an origin…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos