Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the third brake light on the Renault Megane.

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part:

See other generations:
Video tutorial

Today we will explain how to independently replace the third brake light on a Renault Megane vehicle. To carry out the replacement, we need to open the trunk and use a flathead screwdriver to remove the clips and push the light assembly outward.

We then close the trunk and disconnect the connector to remove the light assembly. Next, we insert the new light into the housing after connecting your reader and secure it with the locking clips.

Finally, we turn on the vehicle's lights to test the functionality of the light; if it does not work, it may be necessary to replace the related wiring harness.


Posted on 27 October 2026 by ScegliAuto


Related tutorials

How to Replace the Third Brake Light on a Renault Megane
How to Replace the Third Brake Light on a Renault Megane
Renault Megane (2008-2015 / Megane III, Megane 3) Here’s how to replace the bulbs of the third brake light on a Renault Megane: lift the tailgate and remove the cover of the third brake light from th…
How to Remove the Third Brake Light on a Renault Megane 2
How to Remove the Third Brake Light on a Renault Megane 2
Renault Megane (2002-2010 / Megane 2) Today, you will learn how to remove the third brake light on a Renault Megane, second generation model produced from 2002 to 2010. Start by opening t…
Replacement of Third Brake Light Bulbs
Renault Megane (1995-2003 / Megane 1) Replacing the bulbs of the third brake light, located at the centre of the rear window, is very straightforward. To access this lamp holder, press th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos