Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Third Brake Light on a Renault Megane

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part:

Here’s how to replace the bulbs of the third brake light on a Renault Megane: lift the tailgate and remove the cover of the third brake light from the inside by pressing the two retaining tabs. Disconnect the electrical connector and remove the support plate. After identifying the faulty bulbs, replace them with new ones, remembering never to touch the new bulbs with bare hands, as this can shorten their lifespan. Now, reattach the support plate and reconnect the electrical connector. Refit the cover and close the tailgate. Test the new lights to ensure they work. Job done!

Updated on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of Third Brake Light Bulbs
Renault Megane (1995-2003 / Megane 1) Replacing the bulbs of the third brake light, located at the centre of the rear window, is very straightforward. To access this lamp holder, press th…
How to disassemble the third brake light of a Renault Megane 2
How to disassemble the third brake light of a Renault Megane 2
Renault Megane (2002-2010 / Megane 2) Today we will see how to remove the third brake light on a Renault Megane, second generation model produced from 2002 to 2010. So let's start the ope…
How to replace the rear headlight bulb on the Renault Megane
How to replace the rear headlight bulb on the Renault Megane
Renault Megane (2015-2023 / Megane 4, Megane IV) The information provided in this guide will show us how to disassemble and replace the rear headlight bulb of the Renault Megane. First, we open the …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos