Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on Renault Clio

Model: Renault Clio Clio IV, Clio 4, MK 4 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Warning light – error code

See other generations:
Video tutorial

After performing an oil change and filter replacement on your vehicle, you need to update the frequency of the next service on the dashboard display. To do this, sit in the driver's seat and switch on the ignition.

Locate the buttons with the up and down arrows at the end of the right multifunction lever, then press the up arrow button to scroll through the various menu functions until you reach the Service interval option. At this point, press and hold the up arrow button to reset the warning and update it for the next service.


Updated on 21 May 2026 by ScegliAuto


Related tutorials

Renault Clio (2019-2026 / Clio V, Clio 5) Good morning, today’s goal is to reset the "Service" light on your Renault Clio. Turn on the instrument panel by pressing the power button. Next, usi…
Renault Clio (2019-2026 / Clio V, Clio 5) Let’s see how to reset the service light on a Renault Clio V: turn on the ignition without starting the engine and wait for the instrument test. Navi…
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) To reset the service light on the Renault Clio 2006, use the two side buttons up and down on the right-hand lever of the steering wheel, the lever be…

    Frequently Asked Questions

    • Clio 2005-2013 - What does the flashing engine light on a Renault Clio III mean? Read answer
    • Clio 2005-2013 - What does the electrical fault warning light mean in the Renault Clio? Read answer
    • Clio 2012-2019 - What is the authentication code in a Clio and where is it located? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos