Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Renault
    3. :
  3. Clio
    4. : Headlight bulb replacement

Renault Clio - Video tutorial

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Headlight bulb
Operation: Headlight bulb replacement

To replace the headlight bulb it is not necessary to disassemble the headlight as there is enough space; then remove the rubber protection cap located behind the headlight, unhook the power socket and then the fixing spring of the bulb to be able to extract it from its seat; then insert the new bulb aligning it correctly and avoiding touching the bulb with your fingers; secure it by re-hooking the spring and reconnecting the power socket; finally reposition the rubber cap making sure it adheres correctly. Repeat the same procedure for the high beam bulb. For the lateral arrow, just unhook the bulb holder and extract the bulb (bayonet coupling).


Posted on 7 August 2023 by ScegliAuto



How do you replace the front headlight bulb of the Renault Clio 2?
Renault Clio (1998-2005 / Clio 2, MK 2) In order to replace the headlight bulb of the Renault Clio, you need to open the hood so that you can access the internal part of the headlight assem
How to replace the headlight bulb on Renault Clio 4?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) The replacement of the headlight bulb of the Renault Clio 4 is carried out by opening the hood so that you can access the rear part of the headlight
How do you replace the rear headlight bulb of the Renault Clio?
Renault Clio (1998-2005 / Clio 2, MK 2) The replacement of the rear headlight bulb on the Renault Clio is done by opening the rear tailgate so that the knob inside the trunk, located near t

Other guides that may interest you

    Frequently Asked Questions

    • Clio 2005-2013 - What bulbs does the Renault Clio mount in the headlight? Read Answer
    • Clio 2005-2013 - Renault Clio 3 bulbs not working? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos