Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS on the Renault Captur

Model: Renault Captur MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

See other generations:
Video tutorial

If the tyre pressure warning light illuminates on your vehicle, the first step is to check the actual tyre pressures and, if necessary, restore them to the manufacturer's minimum recommended levels. This guide explains how to reset the tyre pressure warning light.

First, sit in the driver's seat and turn on the ignition. Using the controls on the right-hand stalk, select the tyre pressure memory function.

Then, press and hold the same button until the low pressure indication turns off.


Updated on 7 July 2026 by ScegliAuto


Related tutorials

How to Reset the TPMS Light on a Renault Captur
How to Reset the TPMS Light on a Renault Captur
Renault Captur (2019-2026 / MK 2) The TPMS light comes on in a Renault Captur when it is necessary to adjust the tyre pressure. Once you have adjusted the tyre pressures according to …
How to reset the TPMS light on the Renault Captur.
How to reset the TPMS light on the Renault Captur.
Renault Captur (2013-2019 / MK 1) Let's turn on the dashboard of the Renault Captur to reset the tire pressure warning light. Press the down arrow button to access the vehicle setting…
How to Reset the TPMS Light on a 2020 Renault Captur
How to Reset the TPMS Light on a 2020 Renault Captur
Renault Captur (2019-2026 / MK 2) When the tyre pressure light comes on in a 2020 Renault Captur, it means you need to adjust the tyre pressures. After that, you can focus on resettin…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos