Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Dipped Beam Bulb on a Renault Megane

Model: Renault Megane Megane 4, Megane IV - Years 2015-2023
Part: Headlight bulb

This brief video guide shows the procedure to replace the dipped beam bulb (H7) on a fourth-generation Renault Megane, produced from 2015 to 2022. Start by opening the vehicle's bonnet, then remove the rubber cover located at the back of the headlamp. Next, grasp and slightly turn the bulb holder counterclockwise to extract it, then remove the old bulb from the holder and replace it with a new one. Finally, reassemble everything by following the reverse procedure.

Updated on 25 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the front headlight bulb of the Renault Megane
Replacement of the front headlight bulb of the Renault Megane
Renault Megane (2002-2010 / Megane 2) These short and simple steps will show us how to disassemble and replace the dipped beam bulb of the front headlight of the Renault Megane. First of …
How to Replace the Dipped Beam Bulbs in a Renault Megane?
How to Replace the Dipped Beam Bulbs in a Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) Replacing the dipped beam bulbs in a Renault Megane 3 is very simple. For this operation, you will need a 13mm socket and, of course, replacement bul…
How to replace the front headlight bulb of the Renault Megane
How to replace the front headlight bulb of the Renault Megane
Renault Megane (2015-2023 / Megane 4, Megane IV) These steps will guide us on how to disassemble and replace the low beam bulb of the front headlight of the Renault Megane. First of all, we open the…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos