Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Suspension on the Seat Inca

Model: Seat Inca MK 1 - Years 1995-2003
Part: Suspension system

The main instructions in this guide will show you how to remove and replace the rear suspension on the Seat Inca. First, lift the vehicle and start unscrewing the lower bolt of the suspension, disconnecting the pin from the axle; similarly, disconnect the suspension at the top using a socket spanner, as shown in the video. At this point, install the new original suspension, securing it properly at the top and then from below; likewise, replace the other rear suspension.

Posted on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the battery of the Seat Inca
How to replace the battery of the Seat Inca
Seat Inca (1995-2003 / MK 1) In this guide, we will see the instructions necessary to disassemble and replace the battery of the Seat Inca. First, let's open the vehicle's hood a…
What is the fuse diagram of the Seat Inca van?
What is the fuse diagram of the Seat Inca van?
Seat Inca (1995-2003 / MK 1) In this video we can see where the fuse boxes of the Seat Inca van are located and what the respective diagrams are, useful in case we need to check …
What is the fuse layout of the Seat Inca van?
What is the fuse layout of the Seat Inca van?
Seat Inca (1995-2003 / MK 1) If some of the devices in our Seat Inca van have suddenly stopped working, the first thing we can do is check the status of the respective fuses whos…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos