Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Seat Cordoba?

Model: Seat Cordoba MK 2 - Years 2002-2009
Part: Service warning light

From the dashboard of the Seat Cordoba, you can completely clear the Service light by pressing the button located on the right side of the dashboard: while holding the button down, insert the ignition key into the lock and turn it to activate the dashboard. When the dashboard is activated, continue to hold the button for a few seconds and then turn it to make the light disappear. You can verify that it has turned off by switching off and then on the dashboard by turning the key in the lock.

Posted on 18 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the Service light on a Seat Cordoba?
How do you reset the Service light on a Seat Cordoba?
Seat Cordoba (2002-2009 / MK 2) The Service light of the Seat Cordoba can be reset by pressing the button located on the right side of the dashboard: by continuing to hold the butto…
How to Replace the Window Switch Panel on the Seat Cordoba - Ibiza
How to Replace the Window Switch Panel on the Seat Cordoba - Ibiza
Seat Cordoba (2002-2009 / MK 2) Follow the steps below to remove and replace the window switch panel on the Seat Cordoba, as well as the Seat Ibiza. First, open the front door and s…
How to Program the Key for the Seat Cordoba?
How to Program the Key for the Seat Cordoba?
Seat Cordoba (2002-2009 / MK 2) To program the key for the Seat Cordoba, insert the new blank key into the ignition switch: once inserted, connect a diagnostic tool to the vehicle's…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos