Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Seat Leon?

Model: Seat Leon - Years 2005-2013
Part: Service warning light

By holding down the button located in the centre of the dashboard, you can start the reset procedure for the Service light on the Seat Leon: while continuing to hold this button, insert the ignition key and turn it to activate the dashboard. At this point, you can release the button, turning it until the number indicating the time starts to flash: at this point, the dashboard can be turned off. Once it is turned back on, you can check that the Service light has been completely cleared from the screen.

Posted on 25 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Seat Leon?
How to Reset the Service Light on a Seat Leon?
Seat Leon (2005-2013 / 1P) To reset the Service light on a Seat Leon, press and hold the button located in the centre of the instrument cluster. This allows you to insert the i…
How to Reset the Service Light on a 2009 Seat Leon
How to Reset the Service Light on a 2009 Seat Leon
Seat Leon (2005-2013 / 1P) To reset the service light on a 2009 Seat Leon, get into the vehicle, insert the key, and turn it to the ON position. This allows you to turn on the …
How do you reset the Service light on a Seat Leon?
How do you reset the Service light on a Seat Leon?
Seat Leon (1999-2005 / 1M) It will be possible to completely reset the Service light on the Seat Leon by holding down the button located on the right side of the instrument pan…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos