Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Pollen Filter in the Seat Ibiza 3

Model: Seat Ibiza 6L - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Air filter

See other generations:
Video tutorial

Before starting the replacement of the cabin pollen filter in the Seat Ibiza 3 (2008-2009), position your car on a flat surface or on a ramp to ensure the operator's safety. This precaution should be taken whenever performing maintenance on any vehicle.

At this point, locate the pollen filter housing, which in this case is situated in the cabin, on the passenger side, to the left (under the dashboard). Remove the cover, extract the filter, and replace the old filter with the new one. Close the housing, and you're done!


Updated on 1 May 2026 by ScegliAuto


Related tutorials

How to Change the Cabin Air Filter on a Seat Ibiza
How to Change the Cabin Air Filter on a Seat Ibiza
Seat Ibiza (2002-2009 / 6L) On the Seat Ibiza, the replacement of the cabin air filter is done from the passenger side, in the lower area of the dashboard. Park on a level surfa…
Replacing the Cabin Air Filter in the Seat Ibiza
Replacing the Cabin Air Filter in the Seat Ibiza
Seat Ibiza (2002-2009 / 6L) The following steps will show you how to remove and replace the cabin air filter in the Seat Ibiza, following the instructions below. First, open the…
How to Replace the Pollen Filter on a Seat Ibiza
How to Replace the Pollen Filter on a Seat Ibiza
Seat Ibiza (2002-2009 / 6L) Is the pollen air filter due for a change? Not sure how to do it? Here’s how to remove it on a Seat Ibiza. Open the front right door. Use a screwdriv…

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos