Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Seat
    3. :
  3. Cordoba
    4. : How do you replace the Eps sensor in the Seat Cordoba?

Seat Cordoba - Video tutorial

Model: Seat Cordoba MK 2 - Years 2002-2009
Part: Steering wheel
Operation: How do you replace the Eps sensor in the Seat Cordoba?

Let's analyze all the procedures for replacing the sensor in question, through this video guide with verbal description, bearing in mind that the same also applies to various other car models listed by the protagonist. First of all, with the help of the arrows on the sensor, we are going to phase it on the steering column, and then continue with another trick, namely centering the 2 mm notch, of the same sensor, in the cavity present in the steering column. Now it is necessary to use the centering device, i.e. an electronic instrument to be connected via cable to the sensor and by slowly rotating the same sensor, it aligns perfectly with the aforementioned steering column.


Posted on 19 April 2023 by ScegliAuto



Where are the fuses located in the Seat Cordoba?
Seat Cordoba (2002-2009 / MK 2) All the fuses of the Seat Cordoba are contained within the only fuse box that is installed in the car: it is located on the left side of the dashboar
How to adjust the time on the Seat Cordoba - Ibiza
Seat Cordoba (2002-2009 / MK 2) Today's steps will show us how to change the time on the display of the instrument panel of the Seat Cordoba, as well as the Seat Ibiza. First, we ge
How to replace antenna on Seat Cordoba
Seat Cordoba (1993-2002 / MK 1) Is the antenna of our Seat Cordoba damaged? Let's see how the antenna is disassembled and replaced. We unscrew with our hands the faulty antenna from

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos