Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Sherco
    3. : Sherco 50

Model: Sherco Sherco 50
Part: Engine

In order to replace the cylinder of the Sherco 50, you will need to loosen the screws that hold it in place, in the central lower part of the bike in the center of the frame: once the fixing screws of the supports have been loosened, it will be possible to proceed by disconnecting the connectors and freeing the intake and exhaust pipes. Once all these components have been removed, you can unscrew the screws that hold the cylinder to the top of the engine block: this way you can insert the new replacement piece to verify that everything is functioning properly.

Posted on 8 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch on a Sherco 50?
How to Replace the Clutch on a Sherco 50?
Sherco 50 To replace the clutch on the Sherco 50, loosen the screws securing the protective cover located on the left side of the engine block. Once the cover …

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos