Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Sherco
    3. : Se250 : Sherco SE250 side upper fairing replacement

Model: Sherco Se250
Part:
Sherco SE250 side upper fairing replacement

Today we will show you a very simple maintenance, that is the replacement of the upper side fairing (the one closest to the handlebar). It is a very simple job, also suitable for beginners, as it consists only in unscrewing and tightening a few screws. Remove the seat of your Sherco, after having opened it, by unscrewing only the central pin. Then you can already move on to the five screws of the side fairing (see video, there are four lower and one upper). Now, before screwing in the new protective plastic, make sure that the internal joints of the same are compatible with the seat of your bike, otherwise make some changes to allow them to enter.


Posted on 18 January 2024 by ScegliAuto

How to remove and replace the front wheel of the Honda Nc 750X

Today we will see, in this short and simple guide, how to disassemble and replace the front wheel of the Honda Nc 750X motorcycle. First of all we put our bike on the central stand and we start to unscrew the fixing screws of the front brake caliper, in order to remove it from the disc; let's then loosen the central pin of the wheel, using a socket wrench, as shown in the video. At this point we lift the wheel from the ground with a jack or front stand; remove the pin and replace the wheel, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos