Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Sherco
  4. : 250 Sef R : How to lubricate the drive chain on a Sherco 250

Model: Sherco 250 Sef R
Part: Checks and maintenance
How to lubricate the drive chain on a Sherco 250

Before we can start, we will have to go and place our Sherco 250 on a central stand, thus lifting both the front and the rear of the bike. Let's start by spraying the special lubricant in the lower internal section of the chain, near the crown connected to the rear wheel. Immediately after, while we continue to spray the lubricant, we will have to go and rotate the rear wheel, until the chain has completed the entire revolution of the transmission system. When we have completed this last step, we will have to stop spraying the lubricant, and we will be done.


Posted on 4 February 2024 by ScegliAuto

How to remove the seat and the helmet compartment of the Peugeot Speedfight 2

We are going to illustrate below the main instructions that will allow us to disassemble and replace the seat and the helmet compartment of the Peugeot Speedfight 2 scooter. First of all we put our scooter on the central stand and begin to unscrew the fixing screws that we find on the sides of the compartment. helmet holder; we then unscrew the seat screws to remove it, as shown in the video. At this point we unscrew the petrol cap and remove the lateral plastic parts of the compartment, thus accessing the upper part of the engine; then let's reassemble everything, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos