Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Sherco
    3. : 250 Sef R
Start the motorcycle for a few minutes to warm the oil, making it more fluid. Remove the plastic cover under the engine oil compartment by unscrewing the screws. Now unscrew the bolt that seals the engine oil drain hole, allowing the oil to flow out. Collect it in a container and dispose of it properly according to regulations. It is advisable to open the upper filling hole to facilitate the oil drainage and prevent a vacuum. If the lubricant does not drain completely, you can start the motorcycle and give a few revs in neutral; otherwise, tilt the motorcycle. Close the drain hole and pour in the new lubricant from above.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Lubricate the Transmission Chain of a Sherco 250
How to Lubricate the Transmission Chain of a Sherco 250
250 Sef R Before you start, position your Sherco 250 on a centre stand, lifting both the front and rear of the bike. Begin by spraying the appropriate lubrican…

How to Replace the Headlight Bulbs on the KTM RC 200?

As shown in this tutorial, replacing the headlight bulbs on the KTM RC 200 is an extremely simple and quick task. First, ensure that the key is not inserted for safety. Then, approach the headlight in question, locate the bulb holder, and turn it slightly counter-clockwise. Once done, disconnect the power connector, attach the new bulb, and reassemble everything. Avoid touching the glass of the replacement bulb directly with your bare hands, as any residues could cause it to overheat.

Watch the video!


by ScegliAuto

More videos